Android: reproducible signed build (keystore and Bazaar RSA key read from outside the repo), Gradle wrapper, build-apk.sh

First time the project has been built: debug and release both produce an APK.
Release refuses to build without keystore or RSA key.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

android/.gitignore

@@ -6,3 +6,4 @@ local.properties
 *.iml
 *.jks
 *.keystore
+build-out/

android/README.md

@@ -5,27 +5,48 @@
 محصولِ دیجیتال را فقط از راهِ خودش می‌پذیرد. باقیِ اپ همان فرانتِ وب است و با دیپلویِ
 فرانت به‌روز می‌شود، بی‌آن‌که نسخه‌ی تازه‌ی اپ لازم باشد.
 
-> ⚠️ **این پروژه هنوز یک بار هم build نشده.** روی ماشینی نوشته شد که Android SDK نداشت
+> ⚠️ APIِ Poolakey از README خودِ کتابخانه است و خرید روی گوشی هنوز آزموده نشده.
-> (۲۰۲۶-۱۰-۰۳). APIِ Poolakey از README خودِ کتابخانه است. اولین کار: باز کردن در Android
-> Studio، build، و یک خریدِ واقعی روی گوشی.
 
 ## پیش از build — سه چیز از پیشخانِ بازار (سنیور / حسابِ شرکت)
 
 | چه | کجا گذاشته می‌شود | وضعیت |
 |---|---|---|
 | اسمِ پکیج | `applicationId` در `app/build.gradle.kts` | `com.tadrisino.app` حدس است؛ تأیید نشده |
-| کلیدِ RSAِ عمومیِ اپ | `BAZAAR_RSA_KEY` در `app/build.gradle.kts` | ندارد؛ بدونِ آن خرید شروع نمی‌شود |
+| کلیدِ RSAِ عمومیِ اپ | `bazaarRsaKey` در فایلِ تنظیماتِ بیرون از ریپو (پایین) | ندارد؛ بدونِ آن build نوعِ release نمی‌شود |
 | SKUِ هر بسته (محصولِ **مصرف‌شدنی**) | پنلِ ادمینِ بک‌اند: `/admin/subscription/plan/` ← «Bazaar sku» | هیچ‌کدام تعریف نشده |
 
 قیمتِ هر محصول در پیشخانِ بازار باید با قیمتِ همان بسته در ادمین یکی باشد؛ سرور مبلغ را از
 بازار نمی‌خواند.
 
+## تنظیماتِ بیرون از ریپو
+
+keystore و کلیدِ RSA هرگز داخلِ ریپو نمی‌آیند. یک فایل با دسترسیِ ۶۰۰ بسازید: `~/.tadrisino/android.properties`
+(یا مسیرِ دلخواه در `TADRISINO_ANDROID_CONFIG`):
+
+```
+storeFile=/مسیر/کامل/tadrisino-release.jks
+storePassword=...
+keyAlias=...
+keyPassword=...
+bazaarRsaKey=<کلیدِ RSA از پیشخانِ بازار، یک خط>
+```
+
+| مقدار | از کجا | اگر نبود |
+|---|---|---|
+| `storeFile` تا `keyPassword` | keystoreِ شرکت. **همان فایلِ APKِ فعلی را امضا کرده؛ نسخه‌ی تازه با کلیدِ دیگر روی بازار آپدیت نمی‌شود.** دو نسخه‌ی پشتیبان در دو جای جدا | build نوعِ release با پیامِ روشن می‌ایستد |
+| `bazaarRsaKey` | پیشخان ← اپ ← پرداخت درون‌برنامه‌ای | build نوعِ release می‌ایستد (نه اپِ بی‌خرید) |
+
 ## build
 
-1. Android Studio ← Open ← همین پوشه‌ی `android/`. Studio خودش Gradle wrapper را می‌سازد.
+نیازها (یک بار): JDK 17 (`brew install openjdk@17`) و Android SDK با `platforms;android-34` و `build-tools;34.0.0` در `~/Library/Android/sdk`.
-2. `Build ← Generate Signed App Bundle / APK`، با کلیدِ امضای شرکت. **کلیدِ امضا را گم نکنید**:
+
-   بدونِ همان کلید هیچ نسخه‌ی بعدی روی بازار به‌روزرسانی نمی‌شود.
+```bash
-3. نصب روی گوشی‌ای که کافه‌بازار دارد و با حسابِ تست وارد شده.
+cd android && ./build-apk.sh
+```
+
+خروجی `android/build-out/Tadrisino-<نسخه>-<versionCode>.apk` است. پیش از هر انتشار `versionCode` را در `app/build.gradle.kts`
+بالا ببرید (بازار نسخه‌ی با شماره‌ی تکراری را نمی‌پذیرد). اسکریپت امضا را می‌سنجد و اثرانگشتِ گواهی را چاپ می‌کند؛ باید با APKِ قبلی یکی باشد.
+APKِ آزمایشی بی‌نیاز از کلید: `./gradlew assembleDebug`.
 
 ## جریانِ خرید (برای عیب‌یابی)
 

android/app/build.gradle.kts

@@ -1,8 +1,25 @@
+import java.util.Properties
+
 plugins {
     id("com.android.application")
     id("org.jetbrains.kotlin.android")
 }
 
+// تنظیماتِ حساس (keystore و کلیدِ RSAِ بازار) در ریپو نیستند. از فایلی بیرون از ریپو خوانده می‌شوند:
+//   $TADRISINO_ANDROID_CONFIG  یا  ~/.tadrisino/android.properties
+// کلیدها: storeFile, storePassword, keyAlias, keyPassword, bazaarRsaKey. شرحِ کامل: README.md.
+val configFile = File(System.getenv("TADRISINO_ANDROID_CONFIG") ?: "${System.getProperty("user.home")}/.tadrisino/android.properties")
+val secrets = Properties().apply { if (configFile.exists()) configFile.inputStream().use { load(it) } }
+// فقط وقتی build از نوعِ release است الزامی است؛ debug بدونِ آن هم ساخته می‌شود.
+val wantsRelease = gradle.startParameter.taskNames.any { it.contains("release", ignoreCase = true) }
+fun secret(name: String): String {
+    val v = secrets.getProperty(name)?.trim().orEmpty()
+    if (wantsRelease && v.isEmpty()) {
+        throw GradleException("build نوعِ release «$name» را لازم دارد. در ${configFile.path} نیست یا خالی است (README.md ← «تنظیماتِ بیرون از ریپو»).")
+    }
+    return v
+}
+
 android {
     // ⚠️ اسمِ پکیج باید همانی باشد که در پیشخانِ بازار ثبت است. com.tadrisino.app را بازار
     // برای حسابِ شرکت «Product is not found» جواب داد (یعنی هست)، ولی سنیور تأیید نکرده
@@ -21,7 +38,20 @@ android {
         buildConfigField("String", "WEB_URL", "\"https://math.tadrisino2.ir/\"")
         // کلیدِ RSAِ عمومیِ اپ از پیشخانِ بازار (بخشِ «پرداخت درون‌برنامه‌ای»). کلیدِ عمومی
         // است و در اپ می‌نشیند؛ رمز نیست. تا پر نشود، اپ خرید را شروع نمی‌کند.
-        buildConfigField("String", "BAZAAR_RSA_KEY", "\"\"")
+        // از فایلِ بیرون از ریپو؛ برای build نوعِ release خالی بودنش خطا می‌دهد (نه اپِ بی‌خرید).
+        buildConfigField("String", "BAZAAR_RSA_KEY", "\"${secret("bazaarRsaKey")}\"")
+    }
+
+    signingConfigs {
+        create("release") {
+            // release بدونِ keystore ساخته نمی‌شود؛ هرگز بی‌صدا با کلیدِ debug امضا نمی‌شود.
+            if (wantsRelease) {
+                storeFile = file(secret("storeFile"))
+                storePassword = secret("storePassword")
+                keyAlias = secret("keyAlias")
+                keyPassword = secret("keyPassword")
+            }
+        }
     }
 
     buildFeatures {
@@ -31,6 +61,7 @@ android {
     buildTypes {
         release {
             isMinifyEnabled = false
+            signingConfig = signingConfigs.getByName("release")
         }
     }
 

android/build-apk.sh

@@ -0,0 +1,33 @@
+#!/usr/bin/env bash
+#
+# یک دستور برای ساختِ APKِ امضاشده:   ./build-apk.sh
+#
+# چیزی را حدس نمی‌زند: JDK، Android SDK، keystore یا کلیدِ RSA نبود، با پیامِ روشن می‌ایستد.
+# تنظیمات از ~/.tadrisino/android.properties (یا $TADRISINO_ANDROID_CONFIG) می‌آید، نه از ریپو.
+# بعد از build، امضا را با apksigner می‌سنجد و اثرانگشتِ گواهی را چاپ می‌کند تا با نسخه‌ی قبلی بخوانید:
+# گواهیِ متفاوت یعنی بازار آپدیت را نمی‌پذیرد.
+set -euo pipefail
+cd "$(dirname "$0")"
+
+CONFIG="${TADRISINO_ANDROID_CONFIG:-$HOME/.tadrisino/android.properties}"
+export ANDROID_HOME="${ANDROID_HOME:-$HOME/Library/Android/sdk}"
+if [ -z "${JAVA_HOME:-}" ] && [ -d /opt/homebrew/opt/openjdk@17 ]; then export JAVA_HOME=/opt/homebrew/opt/openjdk@17; fi
+
+fail() { printf '✖ %s\n' "$1" >&2; exit 1; }
+[ -n "${JAVA_HOME:-}" ] && [ -x "$JAVA_HOME/bin/java" ] || fail "JDK 17 پیدا نشد (JAVA_HOME). نصب: brew install openjdk@17"
+[ -d "$ANDROID_HOME/platforms/android-34" ] || fail "Android SDK (platforms;android-34) در $ANDROID_HOME نیست."
+[ -f "$CONFIG" ] || fail "فایلِ تنظیمات نیست: $CONFIG (README.md ← «تنظیماتِ بیرون از ریپو»)."
+[ "$(stat -f %Lp "$CONFIG" 2>/dev/null || stat -c %a "$CONFIG")" = "600" ] || fail "دسترسیِ $CONFIG باید ۶۰۰ باشد: chmod 600 \"$CONFIG\""
+[ -x ./gradlew ] || fail "gradlew نیست (gradle wrapper در ریپو کامیت می‌شود)."
+
+./gradlew --no-daemon assembleRelease
+
+APK="app/build/outputs/apk/release/app-release.apk"
+[ -f "$APK" ] || fail "APK ساخته نشد: $APK"
+APKSIGNER="$(ls -d "$ANDROID_HOME"/build-tools/*/apksigner | sort -V | tail -1)"
+"$APKSIGNER" verify --print-certs "$APK" | grep -E "certificate (DN|SHA-256)"
+CODE="$(grep -E '^\s*versionCode' app/build.gradle.kts | grep -oE '[0-9]+')"
+NAME="$(grep -E '^\s*versionName' app/build.gradle.kts | grep -oE '"[^"]+"' | tr -d '"')"
+OUT="build-out/Tadrisino-$NAME-$CODE.apk"
+mkdir -p build-out && cp "$APK" "$OUT"
+printf '✔ %s  (versionCode %s)\n  اثرانگشتِ گواهی بالا باید با APKِ قبلیِ منتشرشده یکی باشد.\n' "$OUT" "$CODE"

android/gradle/wrapper/gradle-wrapper.properties

@@ -0,0 +1,9 @@
+distributionBase=GRADLE_USER_HOME
+distributionPath=wrapper/dists
+distributionUrl=https\://services.gradle.org/distributions/gradle-8.7-bin.zip
+networkTimeout=10000
+retries=0
+retryBackOffMs=500
+validateDistributionUrl=true
+zipStoreBase=GRADLE_USER_HOME
+zipStorePath=wrapper/dists

android/gradlew

@@ -0,0 +1,248 @@
+#!/bin/sh
+
+#
+# Copyright © 2015 the original authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+
+##############################################################################
+#
+#   gradlew start up script for POSIX generated by Gradle.
+#
+#   Important for running:
+#
+#   (1) You need a POSIX-compliant shell to run this script. If your /bin/sh is
+#       noncompliant, but you have some other compliant shell such as ksh or
+#       bash, then to run this script, type that shell name before the whole
+#       command line, like:
+#
+#           ksh gradlew
+#
+#       Busybox and similar reduced shells will NOT work, because this script
+#       requires all of these POSIX shell features:
+#         * functions;
+#         * expansions «$var», «${var}», «${var:-default}», «${var+SET}»,
+#           «${var#prefix}», «${var%suffix}», and «$( cmd )»;
+#         * compound commands having a testable exit status, especially «case»;
+#         * various built-in commands including «command», «set», and «ulimit».
+#
+#   Important for patching:
+#
+#   (2) This script targets any POSIX shell, so it avoids extensions provided
+#       by Bash, Ksh, etc; in particular arrays are avoided.
+#
+#       The "traditional" practice of packing multiple parameters into a
+#       space-separated string is a well documented source of bugs and security
+#       problems, so this is (mostly) avoided, by progressively accumulating
+#       options in "$@", and eventually passing that to Java.
+#
+#       Where the inherited environment variables (DEFAULT_JVM_OPTS, JAVA_OPTS,
+#       and GRADLE_OPTS) rely on word-splitting, this is performed explicitly;
+#       see the in-line comments for details.
+#
+#       There are tweaks for specific operating systems such as AIX, CygWin,
+#       Darwin, MinGW, and NonStop.
+#
+#   (3) This script is generated from the Groovy template
+#       https://github.com/gradle/gradle/blob/3d91ce3b8caaf77ad09f381f43615b715b53f72c/platforms/jvm/plugins-application/src/main/resources/org/gradle/api/internal/plugins/unixStartScript.txt
+#       within the Gradle project.
+#
+#       You can find Gradle at https://github.com/gradle/gradle/.
+#
+##############################################################################
+
+# Attempt to set APP_HOME
+
+# Resolve links: $0 may be a link
+app_path=$0
+
+# Need this for daisy-chained symlinks.
+while
+    APP_HOME=${app_path%"${app_path##*/}"}  # leaves a trailing /; empty if no leading path
+    [ -h "$app_path" ]
+do
+    ls=$( ls -ld "$app_path" )
+    link=${ls#*' -> '}
+    case $link in             #(
+      /*)   app_path=$link ;; #(
+      *)    app_path=$APP_HOME$link ;;
+    esac
+done
+
+# This is normally unused
+# shellcheck disable=SC2034
+APP_BASE_NAME=${0##*/}
+# Discard cd standard output in case $CDPATH is set (https://github.com/gradle/gradle/issues/25036)
+APP_HOME=$( cd -P "${APP_HOME:-./}" > /dev/null && printf '%s\n' "$PWD" ) || exit
+
+# Use the maximum available, or set MAX_FD != -1 to use that value.
+MAX_FD=maximum
+
+warn () {
+    echo "$*"
+} >&2
+
+die () {
+    echo
+    echo "$*"
+    echo
+    exit 1
+} >&2
+
+# OS specific support (must be 'true' or 'false').
+cygwin=false
+msys=false
+darwin=false
+nonstop=false
+case "$( uname )" in                #(
+  CYGWIN* )         cygwin=true  ;; #(
+  Darwin* )         darwin=true  ;; #(
+  MSYS* | MINGW* )  msys=true    ;; #(
+  NONSTOP* )        nonstop=true ;;
+esac
+
+
+
+# Determine the Java command to use to start the JVM.
+if [ -n "$JAVA_HOME" ] ; then
+    if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
+        # IBM's JDK on AIX uses strange locations for the executables
+        JAVACMD=$JAVA_HOME/jre/sh/java
+    else
+        JAVACMD=$JAVA_HOME/bin/java
+    fi
+    if [ ! -x "$JAVACMD" ] ; then
+        die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+    fi
+else
+    JAVACMD=java
+    if ! command -v java >/dev/null 2>&1
+    then
+        die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+    fi
+fi
+
+# Increase the maximum file descriptors if we can.
+if ! "$cygwin" && ! "$darwin" && ! "$nonstop" ; then
+    case $MAX_FD in #(
+      max*)
+        # In POSIX sh, ulimit -H is undefined. That's why the result is checked to see if it worked.
+        # shellcheck disable=SC2039,SC3045
+        MAX_FD=$( ulimit -H -n ) ||
+            warn "Could not query maximum file descriptor limit"
+    esac
+    case $MAX_FD in  #(
+      '' | soft) :;; #(
+      *)
+        # In POSIX sh, ulimit -n is undefined. That's why the result is checked to see if it worked.
+        # shellcheck disable=SC2039,SC3045
+        ulimit -n "$MAX_FD" ||
+            warn "Could not set maximum file descriptor limit to $MAX_FD"
+    esac
+fi
+
+# Collect all arguments for the java command, stacking in reverse order:
+#   * args from the command line
+#   * the main class name
+#   * -classpath
+#   * -D...appname settings
+#   * --module-path (only if needed)
+#   * DEFAULT_JVM_OPTS, JAVA_OPTS, and GRADLE_OPTS environment variables.
+
+# For Cygwin or MSYS, switch paths to Windows format before running java
+if "$cygwin" || "$msys" ; then
+    APP_HOME=$( cygpath --path --mixed "$APP_HOME" )
+
+    JAVACMD=$( cygpath --unix "$JAVACMD" )
+
+    # Now convert the arguments - kludge to limit ourselves to /bin/sh
+    for arg do
+        if
+            case $arg in                                #(
+              -*)   false ;;                            # don't mess with options #(
+              /?*)  t=${arg#/} t=/${t%%/*}              # looks like a POSIX filepath
+                    [ -e "$t" ] ;;                      #(
+              *)    false ;;
+            esac
+        then
+            arg=$( cygpath --path --ignore --mixed "$arg" )
+        fi
+        # Roll the args list around exactly as many times as the number of
+        # args, so each arg winds up back in the position where it started, but
+        # possibly modified.
+        #
+        # NB: a `for` loop captures its iteration list before it begins, so
+        # changing the positional parameters here affects neither the number of
+        # iterations, nor the values presented in `arg`.
+        shift                   # remove old arg
+        set -- "$@" "$arg"      # push replacement arg
+    done
+fi
+
+
+# Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"'
+
+# Collect all arguments for the java command:
+#   * DEFAULT_JVM_OPTS, JAVA_OPTS, and optsEnvironmentVar are not allowed to contain shell fragments,
+#     and any embedded shellness will be escaped.
+#   * For example: A user cannot expect ${Hostname} to be expanded, as it is an environment variable and will be
+#     treated as '${Hostname}' itself on the command line.
+
+set -- \
+        "-Dorg.gradle.appname=$APP_BASE_NAME" \
+        -jar "$APP_HOME/gradle/wrapper/gradle-wrapper.jar" \
+        "$@"
+
+# Stop when "xargs" is not available.
+if ! command -v xargs >/dev/null 2>&1
+then
+    die "xargs is not available"
+fi
+
+# Use "xargs" to parse quoted args.
+#
+# With -n1 it outputs one arg per line, with the quotes and backslashes removed.
+#
+# In Bash we could simply go:
+#
+#   readarray ARGS < <( xargs -n1 <<<"$var" ) &&
+#   set -- "${ARGS[@]}" "$@"
+#
+# but POSIX shell has neither arrays nor command substitution, so instead we
+# post-process each arg (as a line of input to sed) to backslash-escape any
+# character that might be a shell metacharacter, then use eval to reverse
+# that process (while maintaining the separation between arguments), and wrap
+# the whole thing up as a single "set" statement.
+#
+# This will of course break if any of these variables contains a newline or
+# an unmatched quote.
+#
+
+eval "set -- $(
+        printf '%s\n' "$DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS" |
+        xargs -n1 |
+        sed ' s~[^-[:alnum:]+,./:=@_]~\\&~g; ' |
+        tr '\n' ' '
+    )" '"$@"'
+
+exec "$JAVACMD" "$@"

android/gradlew.bat

@@ -0,0 +1,112 @@
+@rem
+@rem Copyright 2015 the original author or authors.
+@rem
+@rem Licensed under the Apache License, Version 2.0 (the "License");
+@rem you may not use this file except in compliance with the License.
+@rem You may obtain a copy of the License at
+@rem
+@rem      https://www.apache.org/licenses/LICENSE-2.0
+@rem
+@rem Unless required by applicable law or agreed to in writing, software
+@rem distributed under the License is distributed on an "AS IS" BASIS,
+@rem WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+@rem See the License for the specific language governing permissions and
+@rem limitations under the License.
+@rem
+@rem SPDX-License-Identifier: Apache-2.0
+@rem
+
+@if "%DEBUG%"=="" @echo off
+@rem ##########################################################################
+@rem
+@rem  gradlew startup script for Windows
+@rem
+@rem ##########################################################################
+
+@rem Set local scope for the variables, and ensure extensions are enabled
+setlocal EnableExtensions
+
+@rem Catch executions from older scripts and ensure they exit cleanly.
+@rem This can be removed once we can be reasonably confident that few people
+@rem will be migrating directly to this new wrapper.
+goto afterSafetyNet
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+goto exitWithErrorLevel
+:afterSafetyNet
+
+set DIRNAME=%~dp0
+if "%DIRNAME%"=="" set DIRNAME=.
+@rem This is normally unused
+set APP_BASE_NAME=%~n0
+set APP_HOME=%DIRNAME%
+
+@rem Resolve any "." and ".." in APP_HOME to make it shorter.
+for %%i in ("%APP_HOME%") do set APP_HOME=%%~fi
+
+@rem Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+set DEFAULT_JVM_OPTS="-Xmx64m" "-Xms64m"
+
+@rem Find java.exe
+if defined JAVA_HOME goto findJavaFromJavaHome
+
+set JAVA_EXE=java.exe
+%JAVA_EXE% -version >NUL 2>&1
+if %ERRORLEVEL% equ 0 goto execute
+
+1>&2 echo.
+1>&2 echo ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+1>&2 echo.
+1>&2 echo Please set the JAVA_HOME variable in your environment to match the
+1>&2 echo location of your Java installation.
+
+"%COMSPEC%" /c exit 1
+goto exitWithErrorLevel
+
+:findJavaFromJavaHome
+set JAVA_HOME=%JAVA_HOME:"=%
+set JAVA_EXE=%JAVA_HOME%/bin/java.exe
+
+if exist "%JAVA_EXE%" goto execute
+
+1>&2 echo.
+1>&2 echo ERROR: JAVA_HOME is set to an invalid directory: %JAVA_HOME%
+1>&2 echo.
+1>&2 echo Please set the JAVA_HOME variable in your environment to match the
+1>&2 echo location of your Java installation.
+
+"%COMSPEC%" /c exit 1
+goto exitWithErrorLevel
+
+:execute
+@rem Setup the command line
+
+
+
+@rem Execute gradlew
+@rem endlocal doesn't take effect until after the line is parsed and variables are expanded
+@rem which allows us to clear the local environment before executing the java command
+endlocal & "%JAVA_EXE%" %DEFAULT_JVM_OPTS% %JAVA_OPTS% %GRADLE_OPTS% "-Dorg.gradle.appname=%APP_BASE_NAME%" -jar "%APP_HOME%\gradle\wrapper\gradle-wrapper.jar" %* & call :exitWithErrorLevel & goto exitWithErrorLevel
+
+@rem This label must not be changed. We rely on old scripts being able to jump to this point.
+:exitWithErrorLevel
+@rem Use "%COMSPEC%" /c exit to allow operators to work properly in scripts
+"%COMSPEC%" /c exit %ERRORLEVEL%